AT128774 Bushing, self aligning – Fits John Deere

Quantity indicated in catalogue: 1

Replacement part: Bushing, self aligning Fits John Deere 700H, 700J, 700K. 

Configuration: Grooved Self-Aligning Bushing Fits John Deere Crawler Dozers and SkiddersThis grooved self-aligning bushing is a direct aftermarket replacement Fits John Deere OEM part number AT128774. Used across a wide range of Fits John Deere crawler dozers, log skidders, scrapers, and forestry equipment, it serves as a pivot and support bushing within the machine's articulating and linkage assemblies. With an inside diameter of 2.3622 inches, a height of 3.6 in, and a length of 1.7 in, it is a precision-fit replacement weighing approximately 2.25 lb.Specifications Inside Diameter: 2.3622 in Height: 3.6 in Length: 1.7 in Weight: approx. 2.25 lb Type: Grooved Self-Aligning Bushing Compatible Models
Fits John Deere Bulldozer / Crawler Dozer: 700H (After SN 937547), 700J, 700K, 750C-II, 750J, 750K, 764, 850J, 850JR, 850K, 850C-IIFits John Deere Crawler / Dozer: 450J, 450K, 550J, 550K, 605K, 650J, 650K, 655K, 755KFits John Deere Skidder (Log): 540E, 540G, 540G-II, 540G-III, 540H, 548E, 548G-II, 548G-III, 548H, 640E, 640G, 640H, 648E, 648G, 648H, 648HT, 740G, 748E, 748G-II, 748G-III, 748H, 748HT, 848H, 848HTFits John Deere Scraper: 1312C, 1510C, 1510DC, 1512C, 1512E, 1810C, 1810DC, 1810E, 1812C, 1812DC, 1814C, 1814DC, 1814E, 2010DE, 2014DE, 2112C, 2112DC, 2112E, 2412DEFits John Deere Forwarder / Harvester: 810EFits John Deere Articulated Dump Truck: 250C, 300C, 350C, 350D, 400DNote: Serial number restriction applies -- Fits John Deere 700H fits After SN 937547 only. Verify your machine serial number before ordering.Replaces Part Number(s):AT128774, CLB10-0003New aftermarket replacement part - not remanufactured, not used.

Reference numbers: AT128774

• One New Aftermarket Replacement Grooved Self-Aligning Bushing Fits John Deere Crawler Dozers and SkiddersThis grooved self-aligning bushing is a direct aftermarket replacement Fits John Deere OEM part number AT128774. Used across a wide range of Fits John Deere crawler dozers, log skidders, scrapers, and forestry equipment, it serves as a pivot and support bushing within the machine's articulating and linkage assemblies. With an inside diameter of 2.3622 inches, a height of 3.6 in, and a length of 1.7 in, it is a precision-fit replacement weighing approximately 2.25 lb.Specifications Inside Diameter: 2.3622 in Height: 3.6 in Length: 1.7 in Weight: approx. 2.25 lb Type: Grooved Self-Aligning Bushing Compatible Models Fits John Deere Bulldozer / Crawler Dozer: 700H (After SN 937547), 700J, 700K, 750C-II, 750J, 750K, 764, 850J, 850JR, 850K, 850C-IIFits John Deere Crawler / Dozer: 450J, 450K, 550J, 550K, 605K, 650J, 650K, 655K, 755KFits John Deere Skidder (Log): 540E, 540G, 540G-II, 540G-III, 540H, 548E, 548G-II, 548G-III, 548H, 640E, 640G, 640H, 648E, 648G, 648H, 648HT, 740G, 748E, 748G-II, 748G-III, 748H, 748HT, 848H, 848HTFits John Deere Scraper: 1312C, 1510C, 1510DC, 1512C, 1512E, 1810C, 1810DC, 1810E, 1812C, 1812DC, 1814C, 1814DC, 1814E, 2010DE, 2014DE, 2112C, 2112DC, 2112E, 2412DEFits John Deere Forwarder / Harvester: 810EFits John Deere Articulated Dump Truck: 250C, 300C, 350C, 350D, 400DNote: Serial number restriction applies -- Fits John Deere 700H fits After SN 937547 only. Verify your machine serial number before ordering.Replaces Part Number(s):AT128774, CLB10-0003New aftermarket replacement part - not remanufactured, not used.