70205756 BALL BEARING – Fits Allis Chalmers

Quantity indicated in catalogue: 1

Replacement part: BALL BEARING. 

Configuration: Clutch Pilot Ball Bearing Fits Allis Chalmers TractorsThis 6205-Z single-shielded deep groove ball bearing serves as the clutch pilot bearing on a wide range of Fits Allis Chalmers (AC) tractors. Seated in the crankshaft pilot bore, it supports and centers the transmission input shaft during clutch engagement and disengagement. The 6205-Z designation indicates a single metal shield on one side; this bearing is also commonly cross-referenced as a sealed (2RS) variant depending on application.Specifications Bearing Type: Deep groove radial ball bearing Shield Type: Single metal shield (Z) Inner Diameter (ID): 25 mm (0.984 in) Outer Diameter (OD): 52 mm (2.047 in) Width: 15 mm (0.591 in) Material: Chrome steel Compatible Models
Fits Allis Chalmers (AC) Tractors: 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 600, 615, 7000, D10, D12, D14, D15, D17, D19, D21, WC, WD, WD45, WFFits Allis Chalmers Industrial/Construction: G138, G160, G226, IIINote: Verify clutch pilot bearing vs. bushing application for your specific serial number before ordering. Some D10 and D12 tractors used a pilot bushing rather than a pilot bearing depending on serial number break.Replaces Part Number(s):70205756, 70205756-A, 6205-Z-I, 6205-Z-I-A, 226859, 6205, 6205-2RSAftermarket Interchange NumbersJD7149, JD9321, N4651, 205FF, 205SS, 29758X, 01109048New aftermarket replacement part - not remanufactured, not used.

Reference numbers: 70205756, 70205756-A, 6205-Z-I, 6205-Z-I-A, 226859, 6205, JD9321, N4651, 205FF, 205SS, 29758X

• One New Aftermarket Replacement Clutch Pilot Ball Bearing Fits Allis Chalmers TractorsThis 6205-Z single-shielded deep groove ball bearing serves as the clutch pilot bearing on a wide range of Fits Allis Chalmers (AC) tractors. Seated in the crankshaft pilot bore, it supports and centers the transmission input shaft during clutch engagement and disengagement. The 6205-Z designation indicates a single metal shield on one side; this bearing is also commonly cross-referenced as a sealed (2RS) variant depending on application.Specifications Bearing Type: Deep groove radial ball bearing Shield Type: Single metal shield (Z) Inner Diameter (ID): 25 mm (0.984 in) Outer Diameter (OD): 52 mm (2.047 in) Width: 15 mm (0.591 in) Material: Chrome steel Compatible Models Fits Allis Chalmers (AC) Tractors: 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 600, 615, 7000, D10, D12, D14, D15, D17, D19, D21, WC, WD, WD45, WFFits Allis Chalmers Industrial/Construction: G138, G160, G226, IIINote: Verify clutch pilot bearing vs. bushing application for your specific serial number before ordering. Some D10 and D12 tractors used a pilot bushing rather than a pilot bearing depending on serial number break.Replaces Part Number(s):70205756, 70205756-A, 6205-Z-I, 6205-Z-I-A, 226859, 6205, 6205-2RSAftermarket Interchange NumbersJD7149, JD9321, N4651, 205FF, 205SS, 29758X, 01109048New aftermarket replacement part - not remanufactured, not used.