4058876 Tune-Up Kit, Spark Plugs, Wiring Set, & Distributor Cap

Quantity indicated in catalogue: 1

Replacement part: Tune-Up Kit, Spark Plugs, Wiring Set, & Distributor Cap Fits Massey Ferguson. 

Configuration: Tune-Up Kit, Spark Plugs, Wiring Set, & Distributor Cap
Specifications:
-(1) 4 Cylinder Spark Plug Wiring Set
--These will fit most 4 cylinder models. They have copper core wires with aluminum coating to prevent corrosion and 90 degree boots.
--Note: You must cut the wires to length and crimp the ends with a crimping tool.
--Wire lengths are approximately;
-(2) 24-3/4" spark plug wires
-(1) 29-3/4" spark plug wire
-(1) 34-1/2" spark plug wire
-(1) 23-1/2" long coil wire.
--The coil wire is made from excess wire left over from the spark plug wire.
-
-(4) Spark Plugs
-Thread Size: 18mm
-Hex Size: 13/16" (20.6mm)
-Reach: 12mm (.472")
-Gap: .028" (0.7mm)
-Heat Range: 2
-Resistor: No
-Thread Pitch: 1.5mm
-
-
-(1) Distributor Cap
-For use on 4 cylinder Delco distributor with screw held cap (1963 and up)
-Replaces Part Number(s): 4058876, 74058876, R11257, 1024914M91, 10P3022, 30-3024016
-
-(1) Ignition Tune-Up Kit
-Contains: Points, Rotor and Condenser
-Fits distributors with screw held cap
-Point Gaps vary by applications
-Replaces Part Number(s): 79001128, 79001168, 19545587, 1954566, 1956007, 1962640, AR12000, AR31814, AR4864, AT14468, AT14873, AT15929, ATK10DSR, R12260, 1024916M1, 839008M1, 839008M91, 10P3024, 10P3025, 156360A, 156365A, 156367A
Made to Fit Massey Ferguson:
Tractor Models: 35, 50, 65, 135, 150, 165, 175, 180, 255
Model Breaks: 35 (SN: 245034 and up with screw held cap), 50 (SN: 536250 and up with screw held cap), 65 (SN: 702827 and up with screw held cap)
Replaces Part Number(s): 1024914M91, 1024916M1, 839008M1, 839008M91
Industrial/Construction Models: 30, 202, 204, 302, 304, 356, 2135, 2200, 2500, 3165
Model Breaks: All with screw held cap202 (SN: 308963 and up), 204 (SN: 343689 and up), 302 (SN: 1326 and up), 304 SN: 1326 and up)
Replaces Part Number(s): 1024914M91, 1024916M1, 839008M1, 839008M91

Reference numbers: 4058876, 74058876, R11257, 1024914M91, 10P3022, 30-3024016, 79001128, 79001168, 19545587, 1954566, 1956007, 1962640, AR12000, AR31814, AR4864, AT14468, AT14873, AT15929, ATK10DSR, R12260, 1024916M1, 839008M1, 839008M91, 10P3024, 10P3025, 156360A, 156365A, 156367A

• One New Aftermarket Tune-Up Kit, Spark Plugs, Wiring Set, & Distributor Cap
• --These will fit most 4 cylinder models. They have copper core wires with aluminum coating to prevent corrosion and 90 degree boots.
• --Note: You must cut the wires to length and crimp the ends with a crimping tool.
• -For use on 4 cylinder Delco distributor with screw held cap (1963 and up)
• -Fits distributors with screw held cap
• Model Breaks: 35 (SN: 245034 and up with screw held cap), 50 (SN: 536250 and up with screw held cap), 65 (SN: 702827 and up with screw held cap)
• Model Breaks: All with screw held cap202 (SN: 308963 and up), 204 (SN: 343689 and up), 302 (SN: 1326 and up), 304 SN: 1326 and up)