200-8474 Cross & Bearing Kit - 74.6mm

Replacement part: Cross & Bearing Kit - 74.6mm Fits Weasler. 

Configuration: Cross and bearing kit for a power take off driveline universal joint. The cross and all four bearing caps come as one set, because replacing a single worn cap leaves the joint out of true and it fails again.
Specifications
Bearing cap diameter: 27 mm
Cap to cap length: 74.6 mm
Rating: 37 HP at 540 RPM
Rating: 56 HP at 1000 RPM
Series: metric 4 Series
Cross reference
200-8474
014-130E
014-130E-A
Applications
Power take off drivelines on cutters, mowers, balers and similar implements that use a 27 mm cap, 74.6 mm cap to cap cross. 
Listed applications:
is decided by those two measurements, not by the implement model, so pull the old cross and measure it before ordering.
Also sold as a U joint kit or a spider kit. Grease the new cross through the fitting before the first run and again every few hours of work.
Aftermarket replacement part. Not manufactured by, sponsored by or affiliated with any equipment maker named here. All makes, models and numbers are listed for reference only.

Reference numbers: 200-8474, 014-130E, 014-130E-A

• Power take off drivelines on cutters, mowers, balers and similar implements that use a 27 mm cap, 74.6 mm cap to cap cross. Fitment is decided by those two measurements, not by the implement model, so pull the old cross and measure it before ordering.
• Also sold as a U joint kit or a spider kit. Grease the new cross through the fitting before the first run and again every few hours of work.
• Aftermarket replacement part. Not manufactured by, sponsored by or affiliated with any equipment maker named here. All makes, models and numbers are listed for reference only.